|
|
|
HOME > PRODUCTS > ON-LINE CONTINUOUS MONITORING |
|
insulation monitoring |
|
|
High Voltage Motor Diagnostics Monitor |
Introduction
HV motor insulation monitoring system -
:Stator winding insulation diagnostics
It is an on-line insulation condition monitoring system for high-voltage motors.
It measures and analyzes the partial discharges generated from the defects in the stator winding. Through monitoring, it can ascertain the relative condition of insulation, the deterioration of which is the leading cause of electrical failures.
Features
1. Insulation condition Stator winding
- Measures and analyzes the partial discharge generated from the defects in the stator winding insulation
2. Temperature & Humidity
- Measures the temperature and humidity of the stator
|
|
|
|
|
|
|
System configuration |
|
Specification |
NO. |
Item |
Description |
1 |
PD channels (A/B/C/N) |
4 |
1-1 |
Frequency band |
0.5 ~ 10 MHz |
1-2 |
Dynamic amplitude range |
70 dB |
1-3 |
Power frequency phase resolution
|
7.5¡Æ |
2
|
Temp. channels, RTD (-50¡É~150¡É)
|
1, Pt-100 |
3 |
Humidity channel, Hm (0~100%)
|
1, SHm-1 |
4 |
Power consumption |
60 W |
5 |
Data Memory |
64 MB |
6 |
Communication interface |
USB / RS-232 / RS-485 |
7 |
Communication protocol |
Modbus RTU |
8 |
Output relay |
3 (Status / Warning / Alarm) |
9 |
Power supply |
100~240 VAC, 50/60 Hz |
10 |
Operating temperature |
-40¡É ~ 50¡É |
11 |
Dimensions |
222¡¿170¡¿35mm |
|
Monitoring methods |
NO. |
Monitoring Item
|
Method |
1 |
Insulation condition of the stator winding
|
- Measures and analyzes the partial discharge generated from the defects in the stator winding insulation |
2 |
Temperature and Humidity
|
- Measures the temperature and humidity of the stator |
|
Sensor types |
NO. |
Monitoring Item |
Sensor type |
Q'ty |
1 |
Insulation condition of the stator winding
|
- Coupling capacitor, CC
- RFCT sensor, RFCT-4
|
3
1 |
2 |
Temperature and Humidity
|
- Temperature sensor, Pt-100
- Humidity sensor |
1
1 |
|
|
|
|
|